Horizontal systems are suitable for securing people in areas at risk of falling when moving on horizontal levels.
With the systems, the user can freely walk and perform his work along the rope or the rail, without having to rehang from the intermediate anchors and curved elements.
The SKYLINE 2.0 is a traversable, horizontal rope fall protection system that secures users in areas where there is a risk of fall over long distances - for flexible working without interruption.
The SECU®GREEN LINE is a traversable, horizontal fall protection system, which was specially developed for roofs with greenery or gravel and is used to protect several users at the same time.
SEKURANT®VARIO is a traversable, horizontal fall protection system that secures users in areas where there is a risk of fall over long distances - for flexible working without interruption.
SKYRAIL is a horizontal rail safety system that comfortably secures users over long distances and easily integrates into the facade of a building thanks to its modern look.
SECU® TRACK is a horizontal rail safety system that comfortably secures users over long distances - can be used on flat and pitched roofs.
The SKYLINE 2.0 horizontal fall protection system secures up to three people at the same time in high risk areas over long distances. Whether work has to be done on the floor, on the ceiling or on the wall - thanks to its design, the SKYLINE 2.0 can be used flexibly in areas where there is a risk of falling. It is mainly used on large flat roofs, in production facilities, for maritime applications, on sewage treatment plants and silos or in logistics. It does not matter whether the substructure is made of wood, concrete or steel. The SKYLINE 2.0 system has a building authority approval (abZ) Z-14.9-869 from the German Institute for Building Technology and is also tested and certified according to EN 795/C:2012 and CEN/ TS 16415:2013.
Permanent fall protection costs time and money. With SKYLINE 2.0, you reduce both and at the same time increase safety for roofers, maintenance crews, in short, for everyone who has to rely on a reliable safety system for their job.
The SKYLINE 2.0 secures users in fall-endangered areas over long distances - for flexible working without interruption.
The traversable stainless steel rope safety system with a diameter of 8 mm is used for horizontal fall protection and can be installed on the floor, wall or ceiling. It is mainly used on large flat roofs, in production facilities, for maritime applications, at sewage treatment plants and silos or in logistics.
Stretched in almost unlimited length, along fall edges, the system is easily guided around corners and obstacles with special curve elements. The curve element is pre-assembled with an angle of 90°. Thanks to the highly flexible design and cut markings on the rope grommets, the angles of the universal curve can also be adjusted to angles of 120 and 135°. The rope pretension can be freely selected from 80 to 130 kg, depending on requirements. This allows the rope to be optimally tensioned even with multiple curves. The maximum load without triggering the fall indicator is 200 kg.
The rope system can be installed on a wide variety of structures such as steel, concrete or wood as well as appropriate supports. The SKYLINE 2.0 system has a building authority approval (abZ) Z-14.9-869 from the German Institute for Building Technology and is also tested according to EN 795/C:2012 and CEN/TS 16415:2013. The maximum number of users is 3 persons. If the system supports have abZ or ETA approval, the SKYLINE 2.0 can be mounted on them without any problems.
In combination with the SKYLOTEC SECUPINs, the function as a single attachment point is also retained, which provides additional capacity during assembly or use of the system in everyday work. Due to the improved damping/force balancing elements of the SKYLINE 2.0, the force transmission into the substructure is significantly lower, which means that the building structure is not excessively stressed.
The SKYLINE RUN can be hooked in and unhooked from the rope at any point of the facility and glides excellently without rehanging on the intermediate anchors and curve elements. In addition, the carabiner of a certified lanyard can be used instead of a slider. This is a major advantage over previously available solutions because flexibility is increased once again and a glider does not have to be carried permanently for use. A lanyard provides the bridge between the anchor device and the body harness. Provided regular maintenance is carried out, the SKYLINE 2.0 is a reliable partner as a horizontal rope safety system for decades to come.
The SECU® GREEN LINE GREEN LINE is a traversable, horizontal, linear fall protection system for attaching personal protective equipment against falls from a height on flat roofs with a slope of up to 5°. SECU® GREEN LINE was specially developed for roofs with greenery or gravel and is used to protect several users at the same time. The system is stabilized in place by weight and can therefore be installed without penetrating the roof sealing. In addition, thermal bridges are avoided as no fasteners are required for installation. Thanks to its corrosion resistance, the fall protection system can also be used in coastal regions and industrial areas with acid rain.
SEKURANT® VARIO LINE is a flexible, horizontal fall protection system for attaching personal protective equipment against falls from a height. Defined deformation in the event of a fall results in minimal force being applied to the system and the user. It is mainly used on large flat roofs, in production facilities, on sewage treatment plants and silos or in logistics. It does
not matter whether the substructure is made of wood, concrete or steel. All components are made of stainless steel and are therefore corrosion-resistant. Thermal bridges are reduced to a minimum due to the insulated SEKURANT® VARIO anchor point support. The SEKURANT® VARIO LINE system has a building authority approval (abZ) Z-14.9-811 from the german institute for building technology and is also tested and certified according to EN 795:2012 TYPE C and CEN/TS 16415:2013.
The SKYRAIL horizontal fall protection system is tested and certified in accordance with EN 795/D:2012 TYPE-D and CEN/TS 16415 and safeguards up to four people at the same time in high risk areas over long distances. The system is used, for example, on flat roofs,stadium roofs, loading facilities, wind power plants or crane runways. Mounted on the floor, wall or ceiling, maintenance work and other activities can be carried out safely with the SKYRAIL system. The user can easily attach his PPE to the SKYRAIL RUN runner element and move freely along the rail without interruption.
Mounted on the floor, wall or ceiling, maintenance work and other activities can be carried out safely with the SKYRAIL system. Users can easily attach their personal protective equipment against falls from a height (PPE) to the SKYRAIL RUNNER and move freely along the rail without interruption. The architecturally high-quality appearance leaves no design wish unfulfilled. The individual color scheme allows the SKYRAIL to blend visually with the building.
SKYRAIL is tested according to DIN EN 795/D:2012 and CEN/TS 16415 and approved for securing up to three persons. The system, made of extremely robust, seawater-resistant aluminium alloy, is suitable for fall protection and as a restraint system for persons and is designed so that it deforms during any fall and in this way cushions the fall. Accessories, such as curved elements, are precisely matched to the system.
Due to its high adaptability, the SKYRAIL is ideally suited to ensure maximum work safety even on complex structures. The system has been designed and tested for operation with the SKYRAIL RUNNER. This runner, which is certified in accordance with EN 795/D:2012, has ball bearings, is therefore subject to minimal wear and can be inserted or removed at any point in the system. It also impresses with its excellent running properties.
System components:
Optional system components:
Materials:
Substrates
Installation conditions:
Maximum number of users
Max. holder space:
The SECU® TRACK fall arrest system is the all-rounder of the SECU® family, designed to ensure maximum safety in areas where there is a risk of falling. Manufactured from high quality stainless steel and anodized aluminium, this versatile system offers a combination of strength, durability and corrosion resistance.
Simplicity and flexibility are paramount: the SECU® TRACK's roller glides can be removed in just a few simple steps and used at any point in the system. This allows up to six people to anchor themselves securely with their personal protective equipment (PPE) at the same time.
At the heart of the anchorage system is the 30 mm special T-profile, which is securely fixed in place using intermediate brackets. The innovative entry and exit terminal allows the SECU®Track runner element to be attached effortlessly, enabling continuous securing without interruptions. The 360° rotatable and roller-guided runner elements guarantee smooth freedom of movement, even when overcoming height differences.
Technical specifications:
Sales support:
Phone +49 2631 9680-930
E-mail: [email protected]
Technical support:
Phone +49 2631 9680-940
E-mail: [email protected]
